Product Overview
The Ideal Logic Combi C24 is a compact, energy-efficient boiler providing central heating and hot water. Designed for small spaces, it offers reliable performance and user-friendly controls.
1.1 Key Features of the Ideal Logic Combi C24
The Ideal Logic Combi C24 is a high-efficiency combination boiler designed for compact spaces, offering a 24kW output. It features a lightweight design, making it easy to install and maintain. The boiler includes a fully modulating burner for optimal energy use and a built-in digital clock for convenient scheduling. Compatible with OpenTherm protocols, it works seamlessly with programmable room thermostats like the SALUS RT520RF. The C24 also boasts low NOx emissions, meeting eco-friendly standards. With a user-friendly control panel, it allows for easy temperature adjustments and system monitoring. Its compact dimensions (165x450x550mm) make it ideal for smaller properties. The boiler is backed by a comprehensive manual, ensuring straightforward operation and troubleshooting. Its reliability and efficiency make it a popular choice for modern heating needs.
1.2 Technical Specifications
The Ideal Logic Combi C24 boiler operates with a 24kW output, ideal for small to medium-sized homes. It has a compact size of 165x450x550mm, making it suitable for installations in limited spaces. The boiler features a modulating burner with a maximum gas rate of 24kW for heating and 24kW for hot water. It supports OpenTherm protocol communication with compatible thermostats, ensuring efficient temperature control. The boiler is designed for low NOx emissions, adhering to environmental standards. It requires a 230V AC power supply and has a maximum operating pressure of 10 bar. The C24 also includes a built-in frost protection system and is compatible with various flueing options. Its high efficiency rating ensures lower energy consumption and reduced utility bills. The technical specifications make it a reliable choice for homeowners seeking a compact yet powerful heating solution.
Installation and Servicing
Installation must follow Benchmark scheme guidelines for warranty validity. Annual servicing by a qualified engineer is recommended to ensure efficiency and safety, adhering to the manual’s specifications.
2.1 Pre-Installation Requirements
Before installing the Ideal Logic Combi C24, ensure the site meets specific criteria. The boiler must be placed in a well-ventilated area, adhering to safety regulations. All existing pipework should be flushed and cleaned to prevent debris from affecting performance. The location should comply with Building Regulations and local safety standards. The installer must ensure the gas supply is appropriately sized and that electrical connections meet the boiler’s specifications. Proper drainage and proximity to a water supply are also essential. Additionally, the area should be clear of flammable materials, and the installer must verify that the boiler’s dimensions fit the space. Compliance with the Benchmark scheme is necessary for warranty validation. Always refer to the manual for detailed guidelines to ensure a safe and efficient installation process.
2.2 Step-by-Step Installation Guide
Begin by preparing the installation site, ensuring all pre-installation requirements are met. Carefully unpack the Ideal Logic Combi C24 boiler and check for any damage. Mount the boiler on a suitable wall, ensuring it is level and secure. Connect the gas supply, following all safety protocols, and ensure the electrical connections are correctly wired according to the manual. Link the water supply and heating system, adhering to the specified configurations. Once all connections are made, perform a thorough test of the system to ensure proper function. Finally, commission the boiler according to the Benchmark scheme and complete the necessary documentation. Always follow safety guidelines and manufacturer instructions to ensure a successful installation.
Maintenance and Upkeep
Regular servicing ensures optimal performance and longevity of the Ideal Logic Combi C24 boiler, maintaining efficiency and safety while preventing potential issues through routine checks and professional care.
3.1 Regular Maintenance Tasks
Regular maintenance for the Ideal Logic Combi C24 involves checking the boiler’s pressure, ensuring it remains between 1-2 bars, and bleeding radiators if necessary to eliminate airlocks. Annual servicing by a qualified engineer is essential to inspect internal components, clean heat exchangers, and verify gas safety. Additionally, users should monitor the system for leaks or unusual noises and ensure all valves are functioning properly. Cleaning the condensate trap regularly prevents blockages and maintains efficiency. It’s also important to keep the area around the boiler clear of obstructions for proper ventilation. Adhering to these tasks ensures optimal performance, energy efficiency, and prolongs the boiler’s lifespan, while also complying with manufacturer guidelines and safety standards.
3.2 Troubleshooting Common Issues
Common issues with the Ideal Logic Combi C24 include the boiler not lighting up, error codes, or a locked-out system. If the boiler fails to ignite, check the gas supply and ensure the valves are open. Low water pressure, indicated by a drop below 1 bar, can cause malfunctions. Reset the boiler by turning it off and on again; Error codes like “E1” or “E2” often relate to sensor issues or ignition problems, which may require professional attention. If the system locks out, check for blockages in the condensate pipe and ensure proper ventilation. Regularly inspecting and cleaning the heat exchanger can prevent issues. Always refer to the manual for specific error code meanings and follow safety guidelines. If unresolved, contact a certified engineer to avoid further complications.
Safety Considerations
Ensure proper ventilation and follow gas safety guidelines when installing or servicing the Ideal Logic Combi C24 boiler to prevent hazards like carbon monoxide poisoning or explosion risks.
4.1 Health and Safety Precautions
Always ensure the boiler is installed by a qualified engineer adhering to local regulations and safety standards. Proper ventilation is essential to prevent carbon monoxide buildup. Turn off the boiler and disconnect power before performing any maintenance or repairs to avoid electrical shock. Never tamper with safety devices or bypass them, as this can lead to dangerous malfunctions. Keep flammable materials away from the boiler and ensure all gas connections are secure. Regular servicing by a Gas Safe registered engineer is crucial to maintain safe operation. Users should familiarize themselves with emergency shutdown procedures and understand the risks of improper installation or misuse. Always follow the manufacturer’s guidelines for safe usage and adhere to health and safety protocols to ensure the boiler operates efficiently and safely.
User Controls and Settings
The Ideal Logic Combi C24 features an intuitive control panel with temperature adjustments, timer settings, and mode selection. Users can easily manage heating and water preferences efficiently.
5.1 Understanding the Control Panel
The control panel of the Ideal Logic Combi C24 is designed for simplicity and ease of use. It features a clear LCD display that shows current settings and status messages. Users can adjust the central heating temperature and domestic hot water temperature independently. The panel also includes a timer function, allowing users to set specific times for heating activation. Navigation buttons enable easy scrolling through options, while the select button confirms choices. Additional controls include a reset button and a mode selector to switch between heating, hot water, or both. The interface is intuitive, ensuring that even those unfamiliar with boilers can operate it effectively. The control panel also provides diagnostic information, helping users identify issues quickly. Regular updates ensure compatibility with the latest thermostats and smart controls for enhanced functionality.
Compatibility and Accessories
The Ideal Logic Combi C24 is compatible with various thermostats and controls, including programmable room thermostats and OpenTherm devices, enhancing heating system efficiency and convenience.
6.1 Compatible Thermostats and Controls
The Ideal Logic Combi C24 is compatible with a range of thermostats and controls, including programmable room thermostats and OpenTherm devices. Popular options include the SALUS RT520 wired programmable thermostat and the SALUS RT520RF wireless programmable thermostat, both offering two-way communication with the boiler for enhanced efficiency. These controls allow users to regulate heating schedules and temperatures precisely, optimizing comfort and energy savings. Additionally, the boiler supports OpenTherm protocol, enabling seamless integration with compatible smart thermostats for advanced heating management.Dual-channel thermostats are also compatible, providing flexibility for heating and hot water control. These accessories enhance the boiler’s functionality, ensuring it meets various household needs while maintaining efficiency and reliability.
User Resources
The Ideal Logic Combi C24 manual is available for free download, providing detailed guidance on installation, operation, and troubleshooting. Visit the official Ideal Boilers website for access.
7.1 Downloading the Manual
Downloading the Ideal Logic Combi C24 manual is straightforward. Visit the Ideal Boilers official website and navigate to the “Support” section. Select “Manuals” and search for “Logic Combi C24.” The manual is available in PDF format and covers installation, operation, and troubleshooting. Ensure to download the correct version corresponding to your boiler’s model and year. For convenience, the manual can also be accessed through authorized dealers or retailers. Always verify the source to ensure authenticity and safety. The manual is free and instantly accessible, providing comprehensive guidance for optimal boiler performance and maintenance.